How To Assemble

1. 
   01

   Attach the Twin Gears to the main unit.

   ! Caution: Unplug the power cord before assembling.
2. 
   02

   Install Extracting Screen over the Twin Gears.

3. 
   03

   Lock the clamp

4. 
   04

   Place the screen cover over the Extracting Screen.

5. 

   Place between juice guide ③ and cup guide ④ by facing plastic juice cup ① to ②residue cup.If juice cup and residue cup is unfit, residue can go into juice cup or juice can go into the cup.

How to Disassemble and Clean

1. 
   01

   Remove the juice and the pulp collectors before disassembling.

2. 
   02

   Once the extraction is completed, remove the screen cover and unlock the clamp with the main power still on.

3. 
   03

   Use one hand to hold the feeding chute area while pressing the start button.

4. 
   04

   Extraction screen will move away from the main unit and the motor will automatically come to a stop with a sound of a beep.

   ! Caution:

   Installed sensor on the Extracting Screen is designed to make the motor stop automatically. (Safety feature designed to stop only the Twin Gears from rotating)

5. 
   05

   Use both hands to remove the Extracting Screen and the Twin Gears.

   ! Caution:

   Be aware of the Twin Gears' weight so to not accidentally drop.

6. 
   06

   Turn off the main switch in the back of the Juice Extractor and disconnect the power cord.

7. 
   07

   Use the scraping knife to remove leftover debris on the Extracting Screen.

8. 
   08

   As shown in the picture, push and pull while rotating the brush left and right under running water for easy cleaning.

9. 
   09

   Clean the twin gears with the provided or any cleaning brush of your choice under running water.

10. 

Utilizing the Extracting Screen Housing

• Standard Extracting Screen: Leafy Green Extract, Seed Extract

  
  

  Commonly used for extracting leafy greens, it is the used the most frequently. (Possible to extract seeds as well.)

  ! Caution: Less extraction will result when the standard extracting screen is used for fruits rather than using the Extracting Screen for Soft Fruits.

• Extracting Screen for Soft Fruits: Grape Juice, Orange Juice

  
  

  Bigger pores than on the standard screen, it should be used to extract items with higher moisture content.

• Grinding Housing: Minced Garlic, Ground Pepper, Fruit Sorbet

  
  

  The hollow bottom design of Grinding Housing makes it very useful in preparing ingredients such as raw garlic and raw pepper, etc. for making Kimchi and other dishes. In addition, Grounding Housing is great in making cool snacks like sorbets for children in summer season with frozen fruits.

• Peanut butter housing

  
  

  When you make the peanut butter, you need peanut butter housing.Instead of sugary jam, try 100% natural peanut butter!

• Housing Identification Number

  

  Check your Housing by the identification number.

  • Standard Extracting Housing
  • Extracting Housing for Soft Fruits
  • Grinding Housing

Solutions to Excessive Insertion of Items

Angelia 5500

Angelia 5500

1. 01

   Press and alternate between forward and reverse.

2. 02

   Once the vegetable is released from the Twin Gears, press start again.

Using Silicone O-Rings

<Silicone O-Rings>

<Extracting Housing>

<Extracting Housing with Silicone O-ring>

Purpose of Silicone O-Rings

Silicone O-Rings when installed on the housing, helps in partial prevention of leakage of juice from high moisture content fruits around the clamp area. Silicone O-Rings can be effectively used even with a tear as long as it stays on the housing.

Silicone O-Rings are sold pre-installed on the following Angelia Models: 5500, 7500, 8500S